Fuel Injector Clinic 2150cc High-Z Injector Set for 2009-2013 GM 6.2L Trucks (8) - IS306-2150H

This Fuel Injector Clinic 2150cc high-impedance injector set delivers 2150 cc/min at 3 bar and 240 lbs/hr at OE 58 psi for 2009-2013 GM trucks and SUVs with the 6.2L V8. It is designed for performance applications requiring high flow capacity and precise low-end control.

Free shipping on this injector set.

Overview

This Fuel Injector Clinic 2150cc injector set is designed for the 2009-2013 GM trucks and SUVs with the 6.2L V8, including the Chevrolet Silverado 1500, Avalanche, GMC Sierra 1500 Denali, Yukon Denali, and Cadillac Escalade. Utilizing high-impedance Bosch core injectors, this set provides a flow rate of 2150 cc/min (200 lbs/hr) at 3 bar (43.5 psi) and 240 lbs/hr (2500 cc/min) at OE 58 psi (4 bar). Each set undergoes dynamic flow matching using Data Match Technology, supplying individual serial numbers and flow results on a Data Match Sheet to ensure precise short pulse width control for idle and part throttle conditions.

These injectors are E85 compatible, though they must not be used with MTBE oxygenated fuels such as Q16 or VP Import due to internal seal compatibility issues. FIC provides plug-and-play GM ECU data, and Max Redline can tune your car for the new injectors through log-based remote tuning or in our Pompano Beach shop. All necessary o-rings for the factory application are included. This item qualifies for free shipping.

Specifications

• Part Number: is306-2150h
• Flow at 43.5 psi: 2150 cc/min (200 lbs/hr)
• Flow at 58 psi: 2500 cc/min (240 lbs/hr)
• Impedance: High Impedance (Saturated)
• Quantity: Set of 8
• Flow Matching: Data Match Technology with individual serial numbers
• E85 Compatible: Yes (Avoid MTBE oxygenated fuels like Q16 or VP Import)
• Connector/Pigtail Included: Solder-in pigtails included (PGTDEN8) or optional plug-and-play adapters (PADPDtoU8)
• Warranty: Lifetime warranty against original manufacturing defects

Fitment

• 2009-2013 GM trucks and SUVs with the 6.2L V8 - Chevrolet Silverado 1500 / Avalanche, GMC Sierra 1500 Denali / Yukon Denali, Cadillac Escalade

Confirm your engine code before ordering - call us with your VIN if unsure.

Wiring

FIC ships these injectors with a different connector than the factory harness. Choose your wiring option above:

• Solder-In Pigtails (PGTDEN8) - Included - $1,786.00
• Plug & Play Adapters to Stock Harness (PADPDtoU8) - $1,876.00

The solder-in pigtails replace the plugs on your harness; the plug & play adapters convert between the injector and stock harness plugs with no cutting or soldering.

Tuning Required

Larger injectors require a tune. FIC provides plug-and-play GM ECU injector data, and Max Redline can dial in your car with log-based remote tuning or in-shop tuning at our Pompano Beach, FL shop.

FAQ

Is tuning required when installing these injectors?
Yes, tuning is required after installing larger injectors. FIC provides plug-and-play GM ECU data, and Max Redline can tune your vehicle for the new injectors via log-based remote tuning or in our Pompano Beach shop.

What fuels should be avoided with these injectors?
These injectors are E85 compatible, but you must avoid using MTBE oxygenated fuels like Q16 or VP Import because they cause seal swelling and flow reduction.

What is the flow rate of this injector set?
The flow rate is 2150 cc/min (200 lbs/hr) at 3 bar (43.5 psi) and 2500 cc/min (240 lbs/hr) at OE 58 psi (4 bar).

Questions?

Call Max Redline / American Muscle Performance at 954-507-6261 or email Sales@americanmuscleperformance.net.