Injector Dynamics ID2600-XDS Fuel Injectors for Dodge Neon SRT-4 / Caliber SRT-4 (Set of 4) - 2600.48.14.14.4. These are genuine Injector Dynamics ID2600-XDS injectors in the 48mm-length, 14mm-top, 14mm lower O-ring configuration. ID specifies this configuration for the applications listed below. Free shipping from Max Redline.
Overview
The ID2600-XDS is Injector Dynamics' biggest injector, built for high-boost, high-horsepower E85 and methanol engines. Sets are matched with ID's Dual Slope Matching, which brings deviation in the non-linear (short pulsewidth) range down to about +/-1.4%, compared with about +/-5.1% using traditional slope-intercept matching. The result is even cylinder-to-cylinder fueling at idle and light load.
Specifications
- Part number: 2600.48.14.14.4
- Injector: Injector Dynamics ID2600-XDS
- Nominal flow rate: 2600 cc/min at 3.0 bar (43.5 psi)
- Maximum differential fuel pressure: 9.0 bar (130.5 psi); requires a minimum of 11 volts
- Fuel compatibility: Methanol, ethanol and all known hydrocarbons (not compatible with ethers such as MTBE/ETBE/TAME or nitromethane)
- Electrical connector: USCAR
- Body length: 48mm
- Top: 14mm O-ring
- Bottom: 14mm lower O-ring
- Quantity: 4 injectors
Fitment (per Injector Dynamics)
- Dodge / Chrysler: Neon SRT-4, Caliber SRT-4
- Honda/Acura: Civic 02-05 Si, Civic 06-11, S2000 06-09, RSX 02-09, TSX 04-10
- Nissan: Sentra SE-R Spec V 00-06
Tuning Required
Larger injectors must be tuned in. Injector Dynamics publishes slope, offset and plug-and-play injector data for popular ECUs, and Max Redline can calibrate your car for the new injectors. See our custom tuning.
Free Shipping
This injector set ships free within the US.
Fitment note: injector fitment depends on year, engine and fuel rail. Send us your VIN before ordering and we will confirm fitment: 954-507-6261 or sales@americanmuscleperformance.net.
