Nitrous Outlet 5.0L Coyote Hardline Plate System for 2011-2017 Mustang GT with Cobra Jet Intake (00-10164)

The Nitrous Outlet 5.0L Coyote hardline plate system (00-10164) is a complete wet nitrous kit for the 2011-2017 Mustang GT with Cobra Jet Intake that adds 50 to 200 HP out of the box (400+ HP capable with additional jetting). It uses a billet aluminum wet nitrous plate with pre-bent hardlines from the solenoids to the plate. Every part needed to install the system is included, and Max Redline sells it with your choice of bottle.

Fitment

• 2011-2017 Ford Mustang GT 5.0L with a Ford Performance Cobra Jet intake manifold

Not sure it fits your car or truck? Send us your VIN and we will confirm fitment before you order.

Key Features

• Power: jetting for 50, 100, 150 and 200 HP included; flows 400+ HP with additional jetting.
• Distribution: six nitrous and six fuel discharge ports per plate saturate the incoming air for even cylinder-to-cylinder mixture.
• Billet construction: CNC-machined aluminum, black anodized with engraved logo and fuel/nitrous labels.
• Safety: wide open throttle (WOT) activation so the system only sprays at full throttle. Nitrous Outlet recommends a WinMax or ProMax controller for RPM/TPS-based activation.
• Install: Pre-bent stainless hardlines and vehicle-specific solenoid brackets give a clean, factory-looking install.
• Fuel: gasoline, or E85 with different jetting.

Specifications

What's Included

Billet nitrous plate, nitrous and fuel solenoids, Ford fuel rail adapter, pre-bent hardlines, wiring, hardware and jetting for 50, 100, 150 and 200 HP, plus the bottle size you select.

Installation

• Bolt-on installation; a tune matched to your shot size is required.
• Our Pompano Beach, FL shop installs nitrous systems at $195/hr. Request an install quote.

Frequently Asked Questions

How much horsepower does this nitrous kit add?

Out of the box it is jetted for 50, 100, 150 and 200 HP. The plate flows 400+ HP with additional jetting, fuel system support and a matching tune.

Do I need a tune to run nitrous on my 5.0L Coyote?

Yes. Nitrous needs timing and fueling set for your shot size, especially above 100 HP. See our custom tuning.

What is the difference between the hardline and standard plate systems?

Both use the same billet plate and solenoids. The hardline version replaces the braided hoses between the solenoids and the plate with pre-bent stainless hardlines for a cleaner, more secure install.

Can I run E85?

Yes, with different jetting. Tell us your fuel when you order so we can confirm the right jets.

Which bottle size should I choose?

A 10 lb bottle is the most common for street use. The 15 lb bottle gives more passes between fills, and the 12 lb is a lightweight composite bottle. Choose No Bottle if you already have one.

Questions about your build? Call 954-507-6261 or email sales@maxredline.com.