Nitrous Outlet 6.2L Supercharged HEMI Hellcat 108mm Nitrous Plate System for Hellcat, Redeye, Demon (00-10196)

The Nitrous Outlet 6.2L Supercharged HEMI Hellcat 108mm plate system is a complete wet nitrous kit that adds 50 to 200 HP out of the box (up to 400 HP with additional jetting) on 6.2L Supercharged HEMI Hellcat engines with an aftermarket 108mm throttle body. The billet plate mounts between the throttle body and the supercharger inlet, and every part you need to install and activate the system is in the box. Part number 00-10196, sold by Max Redline with your choice of bottle.

Fitment

Fits 6.2L Supercharged HEMI Hellcat engines with an aftermarket 108mm throttle body, including:

• 2015-2023 Dodge Challenger SRT Hellcat, Hellcat Redeye and Demon
• 2015-2023 Dodge Charger SRT Hellcat and Hellcat Redeye

Match the plate to your throttle body size: Nitrous Outlet makes this system in several sizes. Not sure which one you have? Send us your VIN and a photo of your throttle body and we will confirm fitment before you order.

Key Features

• Power: jetting for 50, 100, 150 and 200 HP included; the plate flows up to 400 HP with additional jetting.
• Even distribution: six nitrous and fuel discharge ports saturate the incoming air charge for consistent cylinder-to-cylinder mixture.
• Billet plate: CNC-machined aluminum, black anodized with CNC-engraved logo and fuel/nitrous labels.
• Vehicle-specific: application-specific solenoid bracket and hardware for a clean fit. Braided nitrous and fuel lines connect the solenoids to the plate.
• Safety: wide open throttle (WOT) switch only allows the system to activate at full throttle, preventing lean spikes at part throttle.
• Fuel: runs on gasoline; E85 compatible with different jetting.

Specifications

What's Included

Billet aluminum nitrous plate, 400+ HP-rated nitrous and fuel solenoids, vehicle-specific solenoid bracket, nitrous and fuel feed lines, fuel rail adapter, wide open throttle (WOT) switch, wiring harness, hardware and jetting for 50, 100, 150 and 200 HP.

Installation

• Bolt-on install; the plate sandwiches between the throttle body and the supercharger inlet.
• Our Pompano Beach, FL shop installs nitrous systems at $195/hr. Request an install quote.

Frequently Asked Questions

How much horsepower does this nitrous plate add?

Out of the box it is jetted for 50, 100, 150 and 200 HP. The plate itself flows up to 400 HP with additional jetting, fuel system support and a matching tune.

Do I need a tune to run nitrous on my 6.2L Supercharged HEMI Hellcat?

Yes. Spraying nitrous needs a tune with timing and fueling set for your shot size, especially above 100 HP. See our custom tuning.

Which plate size do I need?

Choose the plate that matches your throttle body bore. This version is 108mm for an aftermarket 108mm throttle body. If you have upgraded or ported your throttle body, check its size first or ask us.

Can I run E85?

Yes. The system is E85 compatible with different jetting. Let us know your fuel when you order so we can confirm the right jets.

Which bottle size should I choose?

A 10 lb bottle is the most common for street cars. The 15 lb bottle gives more passes between fills, and the 12 lb is a lightweight carbon-fiber composite bottle. Choose No Bottle if you already have one.

Questions about your build? Call 954-507-6261 or email sales@maxredline.com.