Stainless Works 2006-13 Corvette C6ZO6/ZR1 Headers 2in Primaries 3in X-Pipe High-Flow Cats (part # ZO62CAT), built from 304 stainless steel by Stainless Works in Streetsboro, Ohio.
304 Stainless Steel
TIG Welded
2005–13 Corvette ZO6/ZR1
Long Tube Headers
3" Collector
Made in USA
Overview
Unlock the full potential of your 2005–13 C6 Corvette ZO6 or ZR1 7.0L with the most powerful LS7 headers available from Stainless Works. These headers feature 1-7/8" or 2" diameter 31" long primaries with "D" shaped port-matched flanges and 3" slip-fit collectors. Includes 3" X-pipe, metallic substrate high-flow converters, O2 extensions, AccuSeal clamps, clamp/hanger assemblies, oil cooler lines, compression fittings, zip ties, cable clamps, and more.
For cars running mild head and cam packages, low boost superchargers, or NOS, these headers deliver exceptional performance. Installation will require dropping the front cradle and rerouting the oil cooler lines, but the increase in power will be worth the effort. Our 2" headers were dyno tested on a stock '06 ZO6 and picked up 29 hp and 41 ft/lb with no tuning! When used with a Stainless Works 3" catback, these parts also weigh 40 lbs less than the stock manifolds and exhaust system.
Built from corrosion-resistant 304 stainless steel and fully TIG welded for strength and durability at our state-of-the-art facility in Streetsboro, Ohio — engineered for long-term performance.
Why Stainless Works
- American-made from raw material to finished product
- TIG welded by skilled craftsmen for strength and beauty
- Lifetime warranty on material and craftsmanship
- Direct bolt-on fit for 2005–13 Corvette ZO6/ZR1 7.0L
- Dyno-proven gains of 29 hp and 41 ft/lb with no tuning
Key Features
1-7/8" or 2" Primary Tubes
31" long primaries with "D" shaped port-matched flanges.
3" Slip-Fit Collectors
Improved exhaust scavenging for maximum horsepower and torque.
3" X-Pipe Included
Metallic substrate high-flow converters for maximum performance.
Dyno-Proven Performance
29 hp and 41 ft/lb gains on a stock '06 ZO6 with no tuning.
Mandrel Bent Tubing
Smooth airflow with zero restriction bends.
TIG Welded Construction
Precision welds for maximum durability.
Specifications
| Vehicle Fitment |
2005–13 Chevrolet Corvette ZO6 / ZR1 — 7.0L LS7 |
| System Type |
Long Tube Header Kit with X-Pipe and High-Flow Converters |
| Primary Tube Size |
1-7/8" — or — 2" |
| Primary Tube Length |
31" |
| Flange Type |
"D" Shaped Port-Matched |
| Collector Size |
3" Slip-Fit |
| Catalytic Converters |
Metallic Substrate High-Flow |
| Included Components |
3" X-Pipe, O2 Extensions, AccuSeal Clamps, Clamp/Hanger Assemblies, Oil Cooler Lines, Compression Fittings, Zip Ties, Cable Clamps |
| Dyno Results (2" Headers) |
+29 HP / +41 FT/LB — No Tuning Required |
| Weight Savings |
40 lbs less than stock manifolds and exhaust (with SW catback) |
| Material |
304 Stainless Steel |
| Welding |
TIG Welded |
| Warranty |
Lifetime |
| Origin |
Made in USA — Streetsboro, Ohio |
Fitment Information
⚠️ IMPORTANT INSTALLATION NOTE
Installation will require dropping the front cradle and rerouting the oil cooler lines. The increase in power will be worth the effort.
? DYNO-PROVEN PERFORMANCE
Our 2" headers were dyno tested on a stock '06 ZO6 and picked up 29 hp and 41 ft/lb with no tuning! When used with a Stainless Works 3" catback, these parts also weigh 40 lbs less than the stock manifolds and exhaust system.
This header system fits the 2005–2013 Chevrolet Corvette C6 ZO6 and ZR1 in the following configurations:
Vehicle Applications
✓ 2005–13 Corvette ZO6 — 7.0L LS7
✓ 2009–13 Corvette ZR1 — 6.2L LS9
*Recommended for mild head/cam, low boost, or NOS builds
Primary Tube Options
✓ 1-7/8" Primary Tubes (31" Length)
✓ 2" Primary Tubes
*Both options feature "D" shaped port-matched flanges
⇩ Download Installation Instructions (PDF)
What's In The Box
- Driver & Passenger Side Headers x2
- Metallic Substrate High-Flow Converters
- 3" X-Pipe
- O2 Extensions
- AccuSeal Clamps
- Clamp/Hanger Assemblies
- Oil Cooler Lines
- Compression Fittings
- Zip Ties
- Cable Clamps
- Installation Instructions
Frequently Asked Questions
Will these headers fit my 2005–13 Corvette ZO6 or ZR1?
Yes. These long tube headers are designed specifically for the 2005–2013 Chevrolet Corvette C6 ZO6 with the 7.0L LS7 engine and the ZR1 with the 6.2L LS9 engine. They feature 1-7/8" or 2" primaries with 31" long "D" shaped port-matched flanges and 3" slip-fit collectors.
What performance gains can I expect?
Our 2" headers were dyno tested on a stock '06 ZO6 and picked up 29 hp and 41 ft/lb with no tuning! When used with a Stainless Works 3" catback, these parts also weigh 40 lbs less than the stock manifolds and exhaust system.
What is involved in the installation?
Installation will require dropping the front cradle and rerouting the oil cooler lines. The increase in power will be worth the effort. All necessary components including oil cooler lines, compression fittings, and hardware are included.
What warranty is included?
Stainless Works provides a lifetime warranty on material and craftsmanship — covering the full life of the product, not just a limited term.
Questions? Call us at | Mon–Fri 7:30am–4:30pm EST
Built To Order in 4 Weeks — Free Shipping on Orders $50+
This Listing
- Brand: Stainless Works
- Part number: ZO62CAT
- Product type: Headers
- Fitment: 2006-2013 Corvette C6 Z06 / ZR1
- Configuration: 2, High-Flow Cats
- EPA status: Testing
- Shipping weight: 73.2 lb
California Prop 65 warning applies to this product.
Emissions note: headers, downpipes and catless/high-flow pipes may not be legal for street use in all states. Check your local emissions laws before installing.
Fitment note: Stainless Works systems are application-specific (year, cab/bed, transmission and factory exhaust). Send us your VIN before ordering and we will confirm fitment: 954-507-6261 or sales@americanmuscleperformance.net.
